|
|
|
|
LASER ACCURATE TO .004 " & REPEATABLE.
This portable Laser Toe Gauge was CAD designed specifically for solving the problem of accurately gauging toe angles with a minimum static ride height. This resulted in a laser toe/tracking gauge, having the ability to take toe/tracking angle readings on the front or rear suspension of any vehicle with a minimum static ride height of 12mm or taller. With this design, toe/tracking readings on Indy, FI, NASCAR, Touring, Indy Lights, showroom stock cars, etc. can be performed with the aerodynamic packages remaining in place. The laser toe gauge has been found to be very useful in monitoring cambered solid rear
axles, as cambered hubs are known to alter the toe of the axle if not manufactured
correctly. With the increasing use of solid rear axles with built in toe to improve
handing characteristics, the laser toe gauge has become a necessary diagnostic tool in
order to maintain repeatable setups. Used with the ART's new "Laser String" for rear axle alignment you have an excellent portable alignment system to help you maintain consistency in order to win races. After a simple calibration, the procedure of taking a toe angle reading can be performed by one person in a matter of minutes. With the unique laser head design that incorporates the latest in solid state lasers, toe angle readings can be performed with accuracy's of better than two thousands of an inch per wheel. With this comes the ability to repeat your setups from track to track without worry. Studies have shown the laser toe gauge to be equal or better in accuracy than the high priced permanent shop alignment systems. Accurate to .004". The laser head is battery powered and incorporates the latest in solid state laser
diode technology for excellent laser beam uniformity. Fixturing for individual toe angle
measurement is available using our custom design capabilities. An example would be the
custom laser designed for Indycar inspection which was used for the entire 97 IndyCar/PPG
race season. This fully portable Laser Toe Gauge system is made mostly of aluminum and weighs less than twenty pounds. It comes with all hardware, instructions and angle to fraction conversion charts for toe angle gauging. An optional, handmade, precision instrument case is also available. The portable Laser Toe Gauge is now sold in 15 countries. .
Pricing in U.S. Dollars
OR CALL PHIL@ 239-437-1420
|
|
ANY QUESTIONS OR TO ORDER BY PHONE CALL PHIL 9AM -9 PM EDT 239-437-1420 -FT. MYERS BEACH, FLORIDA USA SEND US AN E-MAIL BY CLICKING ON THESE WORDS
|
